Abrites MN038 - Cluster Calibration IC223 2020 + IC177 2023+ (Visteon R7F701529 BGA)

Abrites MN038 - Cluster Calibration IC223 2020 + IC177 2023+ (Visteon R7F701529 BGA) for Mercedes-Benz Vehicles
Software Activation From Abrites with Product Number: MK25339
Functionality:
Adjust the mileage value in the IC223/IC177 M dashboard
Block the synchronization of the mileage with the EZS module
Supported Models:
W223 S-Class 2020+
W206 C-Class Sedan (Saloon) 2021+
S206 C-Class Station Wagon (T-model) 2021+
V206 C-Class Long Wheelbase Sedan 2021+
X206 C-Class All- Terrain 2021+
X254 GLC 2022+
C254 GLC Coupe 2022+
C236 CLE Coupe 2023+
A236 CLE Cabriolet 2023+
Other models with the IC223, equipped with Visteon R7F701529 BGA processor
W177 A-Class
W243 B-Class
W247 B-Class
H243 EQA- Class
X243 EQB- Class
C118 CLA- Class
H247 GLA- Class
W167 GLE/ GLS- Class
X247 GLB-Class
W257 CLS-Class
X290 AMG GT Four Door Facelift
Model
NA
From Year
To Year
Abrites MN038 license allows you the exceptional ability to calibrate IC223 (2020+) and IC177 M (2023+) clusters in Mercedes-Benz vehicles, equipped with Visteon R7F701529 BGA processors. This software
license ensures a safer and simpler process, not requiring any work with the EZS (EIS) module - it is neither needed, nor affected during the procedure. Synchronisation between the EZS (EIS) module and the
Instrument cluster is blocked via an emulator. All operations are carried out directly on the IC223/IC177 M cluster PCB for maximum efficiency and reliability.
Including models after 2023 with IC177 M, equipped with Visteon R7F701529 BGA processor, such as:
The procedure requires working with the IC223/IC177 M module's PCB on bench, unsoldering a few capacitors and soldering the wires of the CB501 cable onto it. Wiring diagrams are included within the software for
guidance. If alternative wiring is required for specific modules
In order to connect and work with the IC223/IC177 M cluster successfully, you will need the ZN085 RH850/V850Programmer and the ZN092 adapter. The EM019 adapter is required to complete the procedure
successfully. After the new value is written with the help of the RH850 Programmer and CB501 cable, unsolder the CB501 wires and solder the EM019 as shown in the user manual.
AVDI with active Annual Subscription is required to use this functionality.